Category: Changes

We have no idea why there is such a lack of progress with Verizon, so we ordered a short term 6M multilink T1 circuit with Global Crossing as a band-aid. While we are keenly aware that it has no hope of fully taking over from a complete failure of our high capacity circuits, the idea is at least we won’t be completely off the air. It also brings something important to the table on its own: native IPv6. Global Crossing, while one of the more expensive providers, is well known for IPv6 support.

Over time, we will most likely replace it with one of their Ethernet offerings (if available) or at least another DS3. The multiple DS1 circuits simply have the shortest install time frame to our mux. If the Verizon circuit ever does get installed, we’ll probably never dare to make a change lest we wait a year for it to happen.

A factory technician from Eaton Powerware will be on site Friday, March 12 in an attempt to track down a harmonic distortion issue that is conflicting with the voltage regulator in our generator. Because of the nature of any major UPS maintenance, there is an inherent risk that the critical load may be dropped during transfers to and from maintenance bypass. We will closely monitor our facility during this time.

[20100312 11:37] We have switched to maintenance bypass.

[20100312 15:03] Maintenance bypass has been switched off, however we will be switching to generator for testing.

[20100312 17:05] Back on normal. We will be performing a one-hour “lights out” test later tonight to simulate a utility failure and allow the system to perform automatically.

[20100317 18:00] All tests were successful.

We are scheduled to have our supplemental Sprint DS3 start passing traffic on Thursday, March 11 after 13:00 UTC-8. The circuit is currently up, however its BGP neighbor is not active. We do not anticipate any negative impact from this event.

[Mar. 11, 13:10] Turn up was successful and the DS3 is now passing traffic. Time to completion was approximately 8 minutes.

Because all mail retrieved using the Additional Mail Sources feature appear to be coming from trusted internal sources, by default all filters (except anti-virus) are automatically whitelisted. You may now choose to re-enable the SpamAssassin content filter by setting Allow Content Filter option to “Yes”.

We’ve added provisions to change a hosted mail box password (and its matching outbound account) through both of the webmail clients.